Free Call Australia : 1 800 834 991

Related Products

EuroSMC EMU-100 Current power supply in AC

EuroSMC EMU-100 Current Power Supply In AC 
  • Complete computer control with its corresponding software and communication board, RS-485
  • The program has the possibility to control up to 20 units at the same time
  • Computer control of an external element up to 220V (ex. auxiliary contact)

Product Details

EuroSMC EMU-100 Current power supply in AC

The EMU-100 is a completely electronic unit. The following gives more details of this testing unit:
- Complete computer control with its corresponding software and communication board, RS-485. The program has the possibility to control up to 20 units at the same time.
- The unit generates a digital wave form, from a oscillating quartz and adjust this wave in 1024 point/cycle which insures the exact frequency and very low distortion.
- The reference amplitude in d.c. and the selection by a DAC of 12 bits, allows a continued feedback, comparing the output level with the reference and activates a signal which controls the power amplifier, to insure a perfect stabilized and accurate output, even though there are variations in the load, power supply, etc.
- The power module is compact, with forced ventilation and contains an auto power switch which gives the maximum power required in relation to the load. This achieves a very efficient output and low dissipation.
- The transformer load coupled to the power amplifier, allows an galvanic insulation and perfect joining of this load.
- Computer control of an external element up to 220V (ex. auxiliary contact).
- Synchronizes the output wave in phase and/or frequency with respect to external signals (external frequency/phase reference).
- The unit contains an output overload, thermal, and auxiliary power supply alarms as well as a connector for an d.c. measuring instrument, for easy verification.

APPLICATIONS

- To test small circuit breakers.
- Calibration of shunts and measurement instruments.
- To test thermic relays which require a long duration.
- Overheating test.

CHARACTERISTICS

- Regulation 0 - 100A a.c.
- Nominal power: 300VA.
- Can be connected in parallel.
- Input for external phase and/or frecuency reference.
- Computer controlled by serial port RS-485 (adapted to RS-232).
- Overload, overheating alarm leds.
- Rack mounting 19" (482 mm).
- Accuracy: ±1%.
- Distortion: <1%.

EuroSMC PME-500-TR Circuit Breaker Analyzer The PME-500-TR represents a breakthrough in the concept of testing, timing and condition-based analysis of medium- and high-voltage circuit bre...
EuroSMC PME-RESC Fast Measurement Clamps Composed by 6 robust test clamps, ready to be connected directly to standard safety 4 mm terminals (which are the PME-500-TR test lead termination...
EuroSMC PME-TCE Motion Analysis Plug-in Interface The PME-TCE is a small accessory that can be purchased along with the PME-500-TR Circuit Breaker Analyzer or ordered later on with no ins...
OMICRON CIBANO 500 3-in-1 Test System for Medium- and High-Voltage Circuit Breakers The CIBANO 500 circuit breaker test system combines a micro-ohmmeter, timing analyzer, and a coil and m...
WEIS GMBH AA100 Programmable Alarm Annunciator The AA100 Alarm Annunciator provides the ideal solution to all your alarm system requirements. The innovative and unique design gives excep...